搜索结果: 1-15 共查到“工学 Alloys”相关记录237条 . 查询时间(0.165 秒)
福建师范大学物理能源学院师生冯倩副教授、陈俊杰等的研究成果在《Journal of Alloys and Compounds》上发表（图）
福建师范大学 物理能源学院 冯倩 副教授 陈俊杰 研究成果 《Journal of Alloys and Compounds》
2020/2/18
近期，冯倩、陈俊杰等的 “封装在碳基质中的NiSnO3 /石墨烯的三维分层纳米复合物作为长寿命锂离子电池负极材料” 研究成果在《Journal of Alloys and Compounds》上发表。
论文简介如下：
First Exact Model for Diffusion in Magnesium Alloys at Illinois
First Exact Model Diffusion Magnesium Alloys Illinois
2017/3/30
The movement of atoms in solids controls everything.“Everything” includes the materials our world functions with — batteries, corrosion, the processing of structural materials like steels, advanced st...
西安交通大学材料科学与工程学院工程材料基础英文课件Chapter6 NON-FERROUS METALS AND ALLOYS
西安交通大学材料科学与工程学院 工程材料基础 英文 课件 Chapter6 NON-FERROUS METALS AND ALLOYS
2017/3/7
西安交通大学材料科学与工程学院工程材料基础英文课件Chapter6 NON-FERROUS METALS AND ALLOYS.
High-tech metal alloys are widely used in important materials such as the cladding that protects the fuel inside a nuclear reactor. But even the best alloys degrade over time, victims of a reactor’s h...
Researchers Create First Entropy-Stabilized Complex Oxide Alloys
Researchers Entropy-Stabilized Complex Oxide Alloys
2015/10/13
Configurational disorder can be compositionally engineered into mixed oxide by populating a single sublattice with many distinct cations. The formulations promote novel and entropy-stabilized forms of...
New ‘High-Entropy’ Alloy Is As Light As Aluminum, As Strong as Titanium Alloys
High-Entropy As Light As Aluminum As Strong as Titanium Alloys
2014/12/30
Researchers from North Carolina State University and Qatar University have developed a new “high-entropy” metal alloy that has a higher strength-to-weight ratio than any other existing metal material....
西安交通大学工程材料基础课件Chapter6 NON-FERROUS METALS AND ALLOYS
西安交通大学 工程材料基础 课件 Chapter6 NON-FERROUS METALS AND ALLOYS
2014/7/25
西安交通大学工程材料基础课件Chapter6 NON-FERROUS METALS AND ALLOYS。
Control of parameters in rare earth- transition metal alloys for magneto-optical recording media
2011/12/1
The techniques which can be used to control the magnetic and occurs when the temperature in the heated spot increasesufficiently magneto-optical recording properties of sputtered amorphous thin films ...
Thermal analysis and microstructure of master alloys used for modification of silumins
Calorimetric analysis Enthalpy of melting and solidification Hypereutectic silumins
2011/3/31
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the an...
Thermal analysis and microstructure of master alloys used for modification of silumins
Calorimetric analysis Enthalpy of melting and solidification Hypereutectic silumins
2011/3/31
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the an...
New Inclusion Assessment Method in Aluminum Alloys —Electrochemical Method for Inclusion Assessment (EcMIA)
aluminum alloys inclusion assessment electrochemical parameters
2011/8/4
The existence of inclusion influences the properties of aluminum alloy castings, from which the castings will face scrapping under severe condition. Great efforts on the inclusions in aluminum alloy w...
ECAP methods application on selected non-ferrous metals and alloys
Metallic alloys ECAP method Mechanical properties Microstructure
2010/8/17
In many technical processes of forming the deformation is substantially greater than conditions at the tensile test. In this case a torsion tests have already been used for a long time at investigatio...
Crystallographic Characteristic of Intermetallic Compounds in Al-Si-Mg Casting Alloys by Using Electron Backscatter Diffraction
Al-Si-Mg alloys intermetallic compound electron backscatter diffraction (EBSD)
2011/8/3
The Al-Si-Mg alloy which can be strengthened by heat treatment is widely applied to the key components of aerospace and aeronautics. Iron-rich intermetallic compounds are well known to be strongly inf...
Force–displacement characteristics of simply supported beam laminated with shape memory alloys
Shape memory alloy Laminated beam Bilinear hysteretic model Force–displacement characteristics Energy dissipation
2012/2/28
As a preliminary step in the nonlinear design of shape memory alloy (SMA) composite structures, the force-displacement characteristics of the SMA layer are studied. The bilinear hysteretic model is ad...
New tool materials based on Ni alloys strengthened by intermetallic compounds with a high carbon content
Tool materials Ni-based alloys Intermetallic compounds Carbides
2010/8/17
Tool steels containing from 0.30 to 0.60% C, up to 5% Cr and Mo, W and V are universally applied as tool materials for operations in high temperatures. Tools made of these steels obtain functional qua...