搜索结果: 1-6 共查到“木材加工与人造板工艺学 moisture content”相关记录6条 . 查询时间(0.123 秒)
Variation in Moisture Content of Sugi Boxed Heart Timber in Miyazaki Prefecture during Kiln Drying under High Temperature and Low Humidity II
sugi kiln-dry high temperature moisture content internal check
2009/3/6
Sugi (Cryptomeria japonica D. Don) boxed heart timbers from Miyazaki prefecture were kiln-dried at low humidity under two high-temperature conditions. The distribution of moisture content, changes in...
Effect of Changes in the Moisture Content due to Surrounding Relative Humidity on the Contact Stress in Traditional Mortise and Tenon Joints III
compressed sugi komisen hozo-komisen mortise and tenon change of humidity
2009/3/6
This research is focused on evaluating the efficiency and failure mechanism of joints using a komisen (Japanese traditional square key) of compressed sugi (Japanese ceder ;Cryptomeria japonica D. Don)...
Effect of Changes in the Moisture Content due to Surrounding Relative Humidity on the Contact Stress in Traditional Mortise and Tenon Joints II.
komisen compressed wood contact stress mortise and tenon joint
2009/3/6
This research is a continuation of part 11), and focuses on studying the effect of cyclic humidity changes. It also evaluates the anti-relaxation effect by deformation recovery of the komisen(wooden ...
An Application of the Lateral Impact Vibration Method to the Genetic Improvement of Heartwood Moisture Content in Cryptomeria japonica
Cryptomeria japonica heartwood moisture content lateral impact vibration clone
2009/3/6
The lateral impact vibration method is a non-destructive and high through-put method to estimate heartwood moisture content (MC) in living trees. We applied this method to an investigation of 37 clone...
Effect of Changes in the Moisture Content due to Surrounding Relative Humidity on the Contact Stress in Traditional Mortise and Tenon Joints I.
komisen mortise and tenon contact stress compressed sugi
2009/3/6
To understand the stress transmission mechanism in the traditional timber joint, focus was aimed on the contact stress which occurs at the contact surface of mortise and tenon joints. More precisely, ...
Simulation of the Drying Process Using Temperature in Wood as Calculated from Moisture Content
diffusion coefficient finite difference method wet-bulb temperature
2009/3/4
The three-dimensional diffusion equation was solved by the finite difference method, and then the moisture content of structure lumber during drying was calculated. The moisture content was converted...