搜索结果: 1-9 共查到“无机非金属材料 ceramics”相关记录9条 . 查询时间(0.346 秒)
Processing of polysiloxane-derived porous ceramics: a review
Processing polysiloxane-derived porous ceramics a review
2010/10/12
Because of the unique combination of their attractive properties, porous ceramics are considered as candidate materials for several engineering applications. The production of porous ceramics from pol...
The influence of the sintering conditions on the properties of the stainless steel reinforced with TiB2 ceramics
AISI 316L stainless steel TiB2 ceramics Sintering
2010/1/11
The paper analyzes the influence of the temperature and pressure on the properties and structure of the austenitic AISI 316L stainless steel reinforced with 1% vol.TiB2 ceramics.
Purpose: Titanium diborides (TiB2) ceramic is particularly interesting because it exhibits high elastic modulus
and hardness as well as high thermal conductivity. The interest in TiB2 ceramic increas...
Chemical composition and morphology of oxidic ceramics at filtration of steel deoxidised by aluminium
Faculty of Metallurgy and Materials Engineering VUT Brno,FSI
2009/10/23
Composition and morphology of filter ceramics were investigated during filtration of steel deoxidised by aluminium. Filtration was realized with use of filters based on oxidic ceramics Cr2O3, TiO2, Si...
Preparation of Homogeneous Feedstocks for Injection Moulding of Zirconia-Based Ceramics
Feedstock Mixing Injection Moulding Zirconia
2009/10/13
In this study, a new method for preparing homogeneous feedstocks for injection moulding of ZrO2
ceramics was developed and explained in detail. Mixture homogeneity on a large scale was assessed by me...
Investigation of the structure and properties of PVD and CVD coatings deposited on the Si3N4 nitride ceramics
Tool materials PVD CVD Si3N4
2010/2/9
Purpose: Comprehensive structure and properties investigation results of the multilayer, multi-component, gradient PVD and CVD coatings developed on the Si3N4 nitride tool ceramics substrate are prese...
Purpose: Investigation of structure and properties of the Al2O3 based Al2O3+ZrO2, Al2O3+TiC and Al2O3+SiC(w) type based oxide tool ceramics coated with the anti-wear mono- and multilayers of the TiN, ...
Silicon nitride ceramics–review of structure, processing and properties
Ceramics and glasses Silicon nitride Sintering
2010/2/10
Purpose: The purpose of this review is to examine the development of silicon nitride and the related sialons and their processing into a range of high-grade structural ceramic materials.
Design/metho...
Crack growth resistance of Al2O3-ZrO2(nano) (12 mol% CeO2) ceramics
Ductility and crack resistance Fracture toughness R-curve Slow crack growth
2010/2/22
Purpose: Alumina-zirconia ceramics with nano 12 mol% CeO2 stabilized ZrO2 were presented as new ceramics with improvement fracture behavior: better crack growth resistance and limited susceptibility t...