搜索结果: 1-15 共查到“纺织科学技术 Fibres”相关记录90条 . 查询时间(0.172 秒)
Fluorescent naphthalimide dyes for polyester fibres
disperse dyes polyester fibres dyeing fluorescent dyes naphthalimide
2009/6/17
Several fluorescent and mostly newly-prepared dyes, derivatives of 4-aminonaphthalimide,
were synthesised. The structures of the dyes prepared were confirmed by 1H NMR
analysis, and their properties...
TiO2/Ag modified carpet fibres for the reduction of nicotine exposure
polyamide polypropylene nicotine sorption ETS
2009/6/17
The study was carried out to analyse the susceptibility of textile polymers, polyamide and
polypropylene, used in the manufacture of floor coverings, to the sorption of nicotine from
environmental t...
Zinc alginate fibres with a tricalcium phosphate (TCP) nanoadditive
alginate fibres nano-additive fibre forming nanocomposite fibre properties
2009/6/17
Conditions were found for the manufacture of zinc alginate fibres with a tricalcium
phosphate (TCP) nanoadditive. The effect of essential forming process parameters were
determined, such as temperat...
Influence of the Plastification Drawing Conditions and Distribution of Drawing Ratios on the Structure and Properties of Fibres Made of a Polyimidoamide Nanocomposite Containing Montmorillonite
polyimidoamide nano-composites fibres montmorillonite
2009/6/17
The influence of a single- and two-stage drawing process on the structure and properties of fibres made from a polyimidoamide (PIA) nano-composite containing montmorilloniten (MMT) were investigated. ...
Studies on the Infuence of Grafting PET Fibres with Acrylic Acid on Molecular Orientation
polyester fibres grafting,molecularorientation molecularorientationcoefficient
2009/6/15
The molecular orientation of dye introduced into a fibrewascharacterisednumericallybythe coefficientofmolecularorientationfD. Lowering its value was the result of decreasing
molecular orientation in ...
Comparative Analysis of the Infuence of the Kindand Amount of Two Ferromagnetic Nanoadditives on the Structural Properties of Precursor Polyacrylonitrile Fibres
precursor fibres polyacrylonitrile nanoadditive ferromagnetic
2009/6/15
A comparative analysis of the influenceoftwodifferentferromagneticnanoadditivesontherheological properties of polyacrylonitrile spinning solutions in DMF, as well as on the porous
structure and tensi...
Conversion of Natural Fibres into Structural Composites
Bast fibres Decortication Fibre architecture Fibre reinforced composites Life cycle analysis
2009/4/15
Natural fibres are emerging as low cost, lightweight and environmentally superior alternatives to glass fibre in composites. Plant variety, climate conditions and extraction methods in the production...
Manufacture Method and Mechanical Properties of Composite Material based on Natural Mineral Fibres and Biodegradable Resin
Natural mineral fibres Biodegradable resin Processing method
2009/4/13
Environmental problems caused by extensive use of polymeric materials arise mainly owing to lack of landfill space and depletion of finite natural resources of fossil raw materials like petroleum or...
Influence of the Polymer Molecular Mass on the Sorption and Tensile Strength Properties of Cuprum Alginate Fibres
alginate fibres sorption properties tenacity medical application
2009/2/19
A comparative analysis of the sorption properties, water retention and tensile strength properties of cupric alginate fibres obtained from polymers with different molecular weights was carried out. Th...
Dressing Sponges from Chitosan and Chitosan-Alginan Fibres
chitosan calcium alginate microfibrids freeze-drying dressing sponges
2009/2/18
This paper presents a manufacturing process for biological chitosan and chitosan-alginate dressing sponges as well as their biological and physical-mechanical properties. The aim of the research was t...
Comparison of Surface Modification of Wool Fibres by Pronase, Trypsin, Papain and Pepsin
proteolytic enzymes SEM wool morphology
2009/2/18
Nowadays the uses of enzymes in textile industries are being developed because of their harmless effluents and good effectiveness. One of these uses is the shrink proofing of wool fabrics using proteo...
Investigation of the Fibres Diameter Distribution in the Non-woven Textiles for the Medical Applications in the Melt-blow Polyester Technology
melt-blown technology non-woven fibres polyesters diameter of fibres air blow
2009/2/18
Manufacturing non-wovens from fibre-grade polyesters by the melt-blown method from a polymer melt causes great technological problems. The structure of non-woven, its properties and characteristics ar...
Linking Yarns from Staple and Filament Fibres by High-Efficiency Pneumatic Interlacing. Part II: Analysis of Hairiness, Number of Faults and Estimation of the Linking Effects
filament yarns staple yarns linking pneumatic interlacing interlacing nozzle
2009/2/17
Part II of this article is a continuation of the one presented in Fibres & Textiles in Eastern
Europe, No. 1/2008. Part I outlined the innovation of a method of linking yarns by pneumatic
interlacin...
Estimation of the Influence of the Sorption Properties of Selected Natural Fibres on the Efficiency of Deodorisation Processes of Industrial Waste-Gases
odours deodorisation bio-filtration natural fibres volatile organic compounds
2009/2/17
This article presents the results of research into removing volatile organic compounds from waste gases while using bio-filters filled with mixtures of natural materials, such as peat, bark, jute, hem...