搜索结果: 1-15 共查到“林业工程 RESIN”相关记录15条 . 查询时间(0.072 秒)
Pine Resin Derivatives as Sustainable Additives to Improve the Mechanical and Thermal Properties of Injected Moulded Thermoplastic Starch
bioplastic corn starch glycerol thermoplastic starch gum rosin injection-moulding
2024/1/22
Fully bio-based materials based on thermoplastic starch (TPS) were developed starting from corn starch plasticized with glycerol. The obtained TPS was further blended with five pine resin derivatives:...
Epoxidation of Tall Oil Catalyzed by an Ion Exchange Resin under Conventional Heating and Microwave Irradiation
Tall oil fatty acids Conventional Heating Microwave Irradiation
2024/1/10
Tall oil fatty acids (TOFA) are a byproduct from the Kraft pulping process, and they represent a renewable and inexpensive alternative with high potential as a renewable feedstock. Epoxidized TOFA hav...
High-performance gum rosin-modified hyperbranched vinyl ester resin derived from multifunctional pentaerythritol
Rosin Vinyl ester Thermal stability Chemical resistance Bio-based
2023/12/21
In this article, gum rosin-based hyperbranched vinyl ester resin (VPEMPAE) was synthesized from maleic anhydride-modified gum rosin adduct (MPA). This adduct (MPA) was reacted with pentaerythritol to ...
Renewable UV-curable?polyester?methacrylate/cellulose nanocrystals composite?resin?for wood waterproof coating
UV-curable cellulose nanocrystals low viscosity composite star-shaped bio-based
2023/12/19
Low-viscosity UV-curable?resins?are widely used in industry as they allow for UV curing materials with reduced amounts of reactive diluents to adjust the viscosity. But their?mechanical properties?and...
Synthesis of a Novel?Flame Retardant?Containing Phosphorus, Nitrogen, and Silicon and Its Application in?Epoxy?Resin
Flame Retardant Epoxy Resin thermal stability mechanical properties
2023/12/19
A novel?flame retardant?(TDA) containing phosphorus, nitrogen, and silicon was synthesized successfully via a controllable ring-opening addition reaction between 1,3,5-triglycidyl isocyanurate, 9,10-d...
Sustainable alternative for bisphenol A epoxy resin high-performance and recyclable lignin-based epoxy vitrimers
Lignin Epoxy vitrimers Self-healing Shape memory polymer
2023/12/11
Epoxy vitrimers based on dynamic covalent bond chemistry have been developed in recent years as they can solve the problem of recycling and reuse for traditional thermosetting materials. Lignin as an ...
Multifunctional tannin extract-based epoxy derived from waste bark as a highly toughening and strengthening agent for epoxy resin
Waste bark Tannin extract Liquefaction Bio-based epoxy Toughness
2023/12/6
To reduce crude oil consumption and the corresponding environmental impact, the use of sustainable resources has recently attracted much attention. Herein, a low-viscosity and efficient tannin-based e...
Thermal Degradation Behavior of Epoxy Resin Containing Modified Carbon Nanotubes
epoxy resin carbon nanotubes silicone thermal degradation flame retardancy activation energy
2023/12/1
Via the surface-grafting of carbon nanotubes (CNTs) with a silicon-containing flame retardant (PMDA), a novel flame retardant CNTs-PMDA was synthesized. The flame retardancy was tested by cone calorim...
Synthesis of eugenol-modified epoxy resin and application on wood flame retardant coating
Wood Flame retardant Bio-based epoxy resin Low curing activation energy
2023/11/30
In this paper, a novel epoxy flame retardant PPDEG-EP (P-E) was synthesized from eugenol by nucleophilic substitution reaction and Prilezhaev epoxidation. The chemical structure was identified by nucl...
3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties
3D Printing Poly(propylene fumarate) Oligomers Resin Viscosity
2024/2/29
Complex three-dimensional (3D) pore geometries, useful for tissue engineering scaffolds, can be fabricated via photo-crosslinking of resorbable poly(propylene fumarate) (PPF) resins using stereolithog...
Biorenewable rosin derived benzocyclobutene resin: a thermosetting material with good hydrophobicity and low dielectric constant
CROSS-LINKING POLYMER TEMPERATURE NANOINDENTATION
2024/3/5
Development of bio-based polymers has been promoted by the growing concerns about the long-term sustainability and negative environmental footprint of petroleum-based polymer materials. A new monomer ...
New Binary Blends of Ethylene-co-n-butyl Acrylate (EBA) Copolymer and Low Molecular Weight Rosin Ester Resin with Potential as Pressure Sensitive Adhesives
ethylene-co-n-butyl acrylate copolymer glycerol rosin ester pressure sensitive adhesive compatibility tack adhesion
2024/3/12
For improving the adhesion property of ethylene-co-n-butyl acrylate copolymer (EBA) at ambient temperature, binary blends of EBA with 27 wt% n-butyl acrylate and different amounts (20–62 wt%) of low m...
INFLUENCE OF MUF RESIN CONDENSATION DEGREE ON ADHESIVE BOND PROPERTIES
MUF resin synthesis condensation adhesive bond properties beech veneer
2009/11/26
Melamine-urea-formaldehyde resins with their excellent properties, in particular resistance to humidity and water and colourless adhesive bond, are widely used in the wood industry. In spite of the fa...
Effects of Ozonization on the Durability of Fiberboard Bonded with Isocyanate Resin and Phenol Formaldehyde Resin
Fiberboard poly-methylene diphenyl diisocyanate durability acetylation ozone
2010/3/4
Untreated fibers and acetylated fibers were ozonized and used to make fiberboards. The effect of ozonization on the durability of the boards bonded with poly-methylene diphenyl diisocyanate (PMDI) and...
Effects of Various Treatments for Improving Bondability on the Properties of Fiberboard Bonded with Phenol Formaldehyde Resin
fiberboard phenol formaldehyde resin acetylation penetration
2009/3/5
In order to improve the bonding of fiberboard, the penetration of phenol formaldehyde (PF) resin was prevented. The means of preventing penetration were acetylation of wood fibers and the addition of ...